Tp-link Access Point CPE510 300 MBPS

Descrizione

CARATTERISTICHE HARDWARE:

Processore: Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc

Memoria: 64MB DDR2 RAM, 8MB Flash

Interfaccia:

– 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)

– 1 Grounding Terminal

– 1 Reset Button

Alimentazione:

– Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)

– Voltage range: 16-27VDC

Consumo energetico: 9.8 Watts Max

Dimensioni ( L x P x A ): 224 x 79 x 60 mm

Tipo di antenna:

– Built-in 13dBi 2×2 Dual-polarized Directional Antenna

– Beam Width: 45° (H-Plane) / 30° (E-Plane)

Sicurezza:

– 15KV ESD Protection

– 6KV Lightning Protection

Enclosure:

– Outdoor ASA stabilized plastic material

– IP65 waterproof Certification

CARATTERISTICHE WIRELESS:

Standard wireless: IEEE 802.11a/n (with Pharos MAXtream disabled)

Protocollo proprietario: TDMA Mode (with Pharos MAXtream enabled)

Velocità wireless:

– Up to 300Mbps (40MHz,Dynamic)

– Up to 144.4Mbps (20MHz,Dynamic)

– Up to 72.2Mbps (10MHz,Dynamic)

– Up to 36.1Mbps (5MHz,Dynamic)

Frequenza: 5.15~5.85GHz

Potenza di trasmissione: 26dBm/398mw (Adjustable power by 1dBm)

CARATTERISTICHE SOFTWARE:

Configurazioni wireless:

– Pharos MAXtream TDMA Technology

– 802.11a/n Modes

– Selectable Channel Width: 5/10/20/40MHz

– Automatic Channel Selection

– Transmission Power Control

– Dynamic Frequency Selection (DFS)

– WDS Enable/Disable

– Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption

– SSID Broadcast Enable/Disable

– Multi-SSID with VLAN Tagging (AP mode only)

– Distance/ACK Timeout Setting

– Wireless MAC Address Filter

– Wireless Advanced:

> Beacon Interval/RTS Threshold/Fragmentation

>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia

Gestione:

– Discovery and Remote Management via Pharos Control application

– HTTP/HTTPS Web-based management

– System Log

– SNMP Agent(v2c)

– Ping Watch Dog

– Dynamic DDNS

– SSH Server

Tool di sistema:

– Wireless Signal Quality Indicators:

– Signal Strength/Noise/Transmit CCQ/CPU/Memory

– Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP

– Spectrum Analyzer

– Speed Test

– Ping

– Traceroute

Ottimizzazioni di sistema:

– Optimized IGMP Snooping/Proxy for multicast applications

– Hardware watch dog

CARATTERISTICHE ADATTATORE POE:

Dimensioni ( L x P x A ): 85.8×43.9×29.7 mm

Interfacce:

– 1 AC Jack with Earth Ground

– 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data)

– 1 10/100/1000Mbps Shielded Ethernet Port (Data)

Tasto: Remote Reset Button

Indicatori di carica LED: Green

Input: 100-240VAC, 50/60Hz

Output:

– 24VDC, 1.0A Max

– +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)

Efficienza: >80%

Certificazioni: CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark

ALTRO:

Certificazione: CE, FCC, RoHS, IPX5

Contenuto della confezione:

– Outdoor Wireless CPE

– 24V 1A Passive PoE Adapter

– Pole Mounting Straps

– AC Power Cord

– Installation Guide

Requisiti di sistema:

– Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.

Ambiente:

– Operating Temperature: -30°C~70°C (-22℉~158℉)

– Storage Temperature: -40℃~70℃ (-40℉~158℉)

– Operating Humidity: 10%~90% non-condensing

– Storage Humidity: 5%~95% non-condensing